四氯化碳制备二氯卡宾反应机理的理论研究

四氯化碳制备二氯卡宾反应机理的理论研究李来才（四川师范大学化学系成都６１００６６）关键词四氯化碳反应途径过滤态ＭＮＤＯ方法中图分类号Ｏ６２１．１４６二氯卡宾是有机合成中一个重要的试剂。目前制备二氯卡宾的方法有多种［１－３］，但Ｍａｋｃ－ｓｚａ［４］报...     

The application of the measurement uncertainty concept to in-process control in pharmaceutical development

 Any analytical data is used to provide information about a sample. The "possible error" of the measurement can be of extreme importance in order to have complete information. The measurement uncertainty concept is a way to achieve quantitative information about this "possible error" using an estimation procedure. On the basis of the analytical result, the chemist makes a decision on the next step of the development process. If the uncertainty is unknown, the information is not complete; therefore this decision might be impossible. The major problem for the in-process control (IPC) procedure is that not only the repeatability but also the intermediate precision (which expresses the variations within laboratories related to different days, different analysts, different equipment, etc.) has to be good enough to make a decision. Unfortunately, the statistical information achieved from one single analytical run only gives information about the repeatability. This paper shows that the estimation of the measurement uncertainty for IPC is a way to solve the problem and gives the necessary information about the quality of the procedure. An example demonstrates that an estimate of uncertainty based on the standard deviations of an analytical method gives a value similar to one based on the standard deviations obtained from a control chart. Therefore, the estimation is both a very useful and also a very cost-effective tool. Though measurement uncertainty cannot replace validation in general, it is a viable alternative to validation for all methods that will never be used routinely. Received: 24 May 1996 Accepted: 10 August 1996     

Photocatalytic degradation of sulfadiazine in suspensions of TiO2 nanosheets with exposed (001) facets

Antibiotics such as sulfonamides are widely used in agriculture as growth promoters and medicine in treatment of infectious diseases. However, the release of these antibiotics has caused serious environmental problems. In this paper, photocatalytic oxidation technology was used to degrade sulfadiazine (SDZ), one of the typical sulfonamides antibiotics, in UV illuminated TiO₂ suspensions. It was found that TiO₂ nanosheets (TiO₂-NSs) with exposed (001) facets exhibit much higher photoreactivity towards SDZ degradation compared to TiO₂ nanoparticles (TiO₂-NPs) with a rate constant increases from 0.017 min⁻¹ to 0.035 min⁻¹, improving by a factor of 2.1. Under the attacking of reactive oxygen species (ROSs) such as superoxide radicals (O₂^–) and hydroxyl radicals (OH), SDZ was steady degraded on the surface of TiO₂-NSs. Based on the identification of the produced intermediates by LC–MS/MS, possible degradation pathways of SDZ, which include desulfonation, oxidation and cleavage, were put forwards. After UV irradiation for 4 h, nearly 90% of the total organic carbon (TOC) can be removed in suspensions of TiO₂-NSs, indicating the mineralization of SDZ. TiO₂-NSs also exhibits excellent stability in photocatalytic degradation of SDZ in wide range of pH. Even after recycling used for 7 times, more than 91.3% of the SDZ can be efficiently removed, indicating that they are promising to be practically used in treatment of wastewater containing antibiotics.     

Pathways of the reactions of nucleophilic addition of H2O and HF molecules to formaldehyde in the gas phase and in the complex with formic acid:ab initio calculations

The gradient pathways of the reactions of nucleophilic addition of H₂O and HF molecules to formaldehyde in the gas phase and in the XH…H₂CO…HC(O)OH complex (X=OH, F) were calculated by theab initio RHF/6-31G^**, MP2(fc)/6-31G^**, and MP2(full)/6-311++G^** methods. Both reactions proceed concertedly. The formation of H-bonded bimolecular pre-reaction complexes is the initial stage of the gas-phase reactions; at the same time, no indications of the formation of stable π-complexes were found on the potential energy surfaces of systems under study. The calculated energy barriers to the gasphase reactions exceed 40 kcal mol⁻¹, while those to reactions in the complex XH…H₂CO…HC(O)OH (X=OH, F) become more than halved. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2146–2154, November, 1998.     

优化全日制化学教育硕士培养模式的探讨

全日制教育硕士（学科教学·化学）研究生培养是一个具有挑战性的、全新的研究课题。从"目标定位""课程优化"和"实践提升"3个方面对化学教育硕士培养进行探讨。在"目标定位"上应培养化学教育硕士具有较强的化学课堂教学能力和教研能力，在"课程优化"上，应优化更具功能化和结构化的课程体系，在"实践提升"上应搭建基于科学态磨课的全类型、全环节的实践平台。     

Electrospray Ionization Mass Spectra of Amino Acid Methyl Ester 5′-Phosphoramidates of 2′,3′-Isopropylideneuridine

Amino acid methyl ester phosphates were synthesized and determined by using positive-ion mode electrospray ionization mass spectrometry(ESIMS) in combination with multistage tandem mass spectrometry. The fragmentation pathways were investigated, and it was observed that most fragment ions contained the phosphoryl group. It was interesting to observe that the fragmentation pathways of the protonated molecule show some differences when compared with those of the sodium ion adduct. The methoxy group of amino acid methyl ester can migrate from the carbonyl group to the phosphoryl group in the sodium ion adduct.     

CF3O2自由基和NO反应机理的理论研究

用密度泛函理论(DFT)的B3LYP方法, 分别在6-31G、6-311G、6-311+G(d)基组水平上研究了CF3O2自由基和NO反应机理. 研究结果表明, CF3O2自由基和NO反应存在三条可行的反应通道, 优化得到了相应的中间体和过渡态. 从活化能看, 通道CH3O2+NO→IM1→TS1→IM2→TS2→CF3O+ONO的活化能最低, 仅为70.86 kJ•mol-1, 是主要反应通道, 主要产物是CF3O和NO2. 而通道CH3O2+NO→IM1→TS3→CF3ONO2和CH3O2+NO→TS4→IM3→TS5→IM4→TS6→CF3O+NOO的活化能较高, 故该反应难以进行.     

能动抛光磨盘的变形实验研究

 能动抛光磨盘实时产生不同的表面变形，在对大口径非球面光学元件进行精磨和抛光时实现与工件表面良好的大尺寸吻合，可以消除传统光学加工采用小尺寸磨头时带来的高频残余误差并提高加工效率。以加工直径1.3m左右，F/2的抛物面光学元件为例，对能动磨盘在不同离轴度时能够产生的变形进行了计算和实验。结果表明，能动磨盘能够以较高精度产生旋转对称或非对称的抛物面形状。对能动磨盘产生变形后的残余误差进行了分析。     

A UPLC‐TOF/MS‐based metabolomics study of rattan stems of Schisandra chinensis effects on Alzheimer's disease rats model

A UPLC‐TOF/MS‐based metabolomics method was established to explore the therapeutic mechanisms of rattan stems of S. chinensis (SCS) in Alzheimer's disease (AD). Experimental AD model was induced by intra‐hippocampal Aβ_1–42 injection in rats. Cognitive function and oxidative stress condition in brain of AD rats were assessed using Morris water maze tests and antioxidant assays [malondialdehyde (MDA), superoxide dismutase (SOD) and glutathione peroxidase (GSH‐Px)], respectively. UPLC‐TOF/MS combined with multivariate statistical analysis were conducted to study the changes in metabolic networks in serum of rats. The results indicated that the AD model was established successfully and the inducement of Aβ_1–42 caused a decline in spatial learning and memory of rats. The injection of Aβ_1–42 in rat brains significantly elevated the level of MDA, and reduced SOD and GSH‐Px activities. In addition, SCS showed significant anti‐AD effects on model rats. A total of 30 metabolites were finally identified as potential biomarkers of AD and 14 of them had a significant recovery compared with the AD model after SCS administration. Changes in AD metabolite profiling were restored to different levels through the regulation of 13 pathways. This is first report on the use of the UPLC‐TOF/MS‐based serum metabolomics method to investigate therapeutic effects of SCS on AD, and enrich potential biomarkers and metabolic networks of AD.     

Iron(III)-catalyzed synthesis of selenoesters from α-amino carbonyl derivatives at room temperature

An Fe(III)-catalyzed efficient method has been developed for the synthesis of selenoester derivatives in high yields through the coupling of α-amino carbonyl/glycine derivatives and diselenides under ambient air. A library of benzoselenoate derivatives having a variety of substituents has been synthesized. A plausible reaction pathway has been predicted. Experimental results suggest that the reaction proceeds through a radical pathway. Operational simplicity, compatibility with various α-amino carbonyls and diselenides, high yields, fast reaction and mild reaction conditions are the notable advantages of this procedure. We have also shown the practical application of the synthesized selenoesters which is useful to generate peptide bonds in biological sciences.